Culver City Report of Building Records: What Sellers Need Before Selling a House
- Old permits, unpermitted work, zoning surprises: we buy it as-is
- Zero fees, zero commissions, zero closing costs
- No obligation: turn the offer down and owe us nothing
Selling in Culver City? Get a Cash Offer First
The city report shows what is on record for your house. Tell us about the property and get a written cash offer.
Last updated November 17, 2026. Reviewed by the Cash Home Buyers CA team. Information comes from the Culver City Municipal Code, the Culver City Building Safety Division and the City’s adopted fee schedule; sources are listed at the end.
Yes, Culver City requires a city report when you sell a house. Under Culver City Municipal Code Chapter 15.08, the owner must get a property report from the City before entering into an agreement of sale and must deliver it to the buyer. The City’s application is called the Application for Report of Building Records, and the residential fee on the online form is $479.50 (checked 2026-11-17). The report covers City records only: zoning, authorized use and occupancy, and permits of record.
Culver City property report at a glance
| Name in the municipal code | Property report (CCMC Chapter 15.08, Property Reports) |
| Name on the City form | Application for Report of Building Records |
| Who must get it | The owner or the owner’s authorized representative |
| When | Before entering into an agreement of sale. No sale may be completed before the report is delivered to the buyer |
| Which properties | Any lot or parcel in the City with a building on it, residential or commercial |
| Fee | Residential, less than 4 units: $479.50. Commercial: $640.25 (City online form, checked 2026-11-17) |
| Turnaround in the code | Prepared and delivered to the applicant within five working days of the request |
| Where to apply | Online form on the Building Safety Division page. Questions: (310) 253-5800 |
| After the buyer gets it | The buyer signs a receipt furnished by the City, and the receipt goes back to the Building Department |
What is the Culver City property report?
It is a written summary of what the City has on file for your property. The City Council’s stated intent in the code is that a buyer of improved real property gets a report of City records on the authorized use, occupancy and zoning classification before the transfer.
The name changes depending on where you look. The municipal code calls it a “property report.” The Building Safety Division’s form is the “Application for Report of Building Records.” The City fee schedule lists “Residential Property Reports” and a “Fee for Property Report Title.” Escrow officers often just say “the city report.” These all point to the same Chapter 15.08 requirement.
The code is clear that the report is not a warranty. Section 15.08.005 says it is not a representation of any factual or legal matter and only reflects the contents of City records on the date it is issued.
If a prior owner built something without a permit, the report will not certify that work. It will show what the permits of record authorize, and a careful buyer will compare that against the house.
What does the report show?
Section 15.08.020 lists the contents, to the extent City records reflect them:
- The street address of the property
- The zoning classification and the uses authorized in that zone
- The authorized occupancy as established by permits of record
- Variances, conditional use permits, exceptions and other legislative or administrative acts of record
- Any special restrictions on use or development that apply to the property
Chapter 15.08 describes a records report. It does not call for an inspector to walk through the house as part of the report. If you want to know exactly how the City prepares yours, ask Building Safety at (310) 253-5800.
Who has to get one, and are there exceptions?
The duty falls on the owner or the owner’s authorized representative. The code defines “owner” broadly: any person, partnership, association, corporation or fiduciary with legal or equitable title or any interest in the property. A trustee or an executor selling an inherited house is a fiduciary, so plan on the report in an estate sale too.
“Property” means any lot or parcel of real property in the City with a building on it. The application section covers both residential and commercial buildings. An “agreement of sale” includes an exchange.
The code has one exception. Chapter 15.08 does not apply to the first sale of a property in a subdivision whose final map was approved and recorded not more than two years before that first sale. That is a new-construction situation. An ordinary resale of an existing house is covered.
Check which city you are in before you pay. The City’s own form warns that some Los Angeles addresses are in Culver City and some Culver City addresses are in Los Angeles. If the parcel is in the City of Los Angeles, a different city’s rules apply.
When in the sale is the report required?
Early. Section 15.08.015 says the owner must obtain the report before entering into an agreement of sale. The practical reading for a seller is to order it when you decide to sell, not after you accept an offer.
Section 15.08.030 then covers delivery. The owner or the owner’s representative delivers the report to the buyer at the time the agreement of sale is entered into, or upon receipt of the report from the City. The same section says no sale shall be consummated before the report is delivered.
The buyer signs a receipt furnished by the City, and that receipt is delivered to the Building Department as evidence of compliance.
The City repeats the point on its Real Property Transfer Tax page, which says the Application for Report of Building Records must be completed at the time of sale of any property in the City. The transfer tax itself is a separate cost. Our Culver City transfer tax guide covers the rates.
How much does the Culver City report cost?
The City’s online application lists two application types (checked 2026-11-17):
- Residential, less than 4 units: $479.50
- Commercial: $640.25
Those totals match two line items in the City’s Fiscal Year 2026-27 Comprehensive Fee Schedule. The Building Division charges a “Fee for Property Report Title” of $160.75 for residential and $321.50 for commercial. The Planning Division charges $318.75 for “Residential Property Reports.” Add them and you get $479.50 and $640.25.
The form does not list a separate type for residential buildings with four or more units. If you are selling a fourplex or an apartment building, ask Building Safety which fee applies before you submit.
The fee schedule also notes that the City Manager or a designee may waive the property report fee when the applicant is another governmental agency or a 501(c)(3) charitable nonprofit headquartered in Culver City. Most home sellers will not qualify. Fees are set by City Council resolution and change, so confirm the current amount on the form.
How do I get the report? Step by step
- Confirm the address is in Culver City. A Culver City mailing address is not proof. Check the City’s maps or call Building Safety.
- Open the online form. On the Building Safety Division page, find “Requirements for the Sale of a Property” and choose the Application for Report of Building Records.
- Fill it in. The form asks for the property address, the application type, the listing broker if any, the owner’s name and address, and the applicant’s name and email. It also asks three yes or no questions the Finance Department uses for the transfer tax: whether the transfer is to a nonprofit, whether it is 100% deed-restricted affordable housing, and whether it is newly constructed multi-family housing. For a typical house sale the answers are no.
- Sign and submit. The City says a report is provided with every request and recommends one point person so you do not pay for duplicates. Decide whether you, your agent or escrow will file it.
- Deal with the sewer question if it comes up. Under section 15.08.025, if the City has no record of a sewer connection, you must show proof of a sewer connection or a septic system before the report is issued. That proof has to come from a licensed plumber.
- Deliver the report to the buyer and have the buyer sign the City’s receipt. Make sure the signed receipt gets back to the Building Department.
The code gives the City five working days from the request to prepare and deliver the report. A missing sewer record can add time, because the report is held until the plumber’s proof comes in. Chapter 15.08 does not state how long a report stays valid. If your sale drags on or falls out of escrow, ask Building Safety whether the report can be reused.
What happens if I skip the report?
Section 15.08.040 says any violation of the chapter is subject to punishment under the municipal code. The chapter does not state a specific fine, so ask the City Attorney’s office or Building Safety how it is enforced.
The same section protects the deal itself. No sale or exchange is invalid solely because someone failed to comply with Chapter 15.08, unless the failure would be a ground for rescission anyway. In plain terms, skipping the report does not automatically undo a closed sale, but it is still a code violation, and a buyer who was never told about a known problem may have other claims under California disclosure law.
The practical risk is delay. If the missing report comes up late in escrow, you still have to apply, wait for the City and get the buyer’s signed receipt before closing. Ask your escrow officer early how they handle the Culver City report.
What if the report does not match the house?
This is where sellers get nervous. The report lists the authorized occupancy from permits of record. If the house has a garage conversion, an added bathroom or a second unit that never got a permit, the paperwork and the building will not agree, and the buyer will see that before closing.
You have three realistic options. You can legalize the work through Building Safety, which means permits and inspections. You can disclose it and negotiate price with the buyer. Or you can sell as-is to a buyer who already expects it.
Our Culver City building permits guide explains how to pull the permit history, and our guide to selling a house with unpermitted work in California covers disclosure. For zoning questions, such as whether a second unit is allowed on the lot, see the Culver City zoning and ADU guide.
Does an as-is or cash sale still need the report?
Yes. Chapter 15.08 has no exception for as-is sales, cash sales, or sales without an agent. The only exception in the chapter is the new-subdivision first sale described above. “As-is” changes who pays for repairs. It does not remove the City’s paperwork.
What a cash sale changes is what happens after the report arrives. A buyer using a loan may need the lender to accept whatever the report shows. A cash buyer who has already priced in unpermitted work or a zoning limit can read the report, sign the receipt and close.
Not sure what your report will turn up? Call (424) 435-2326 or request a cash offer. There is no cost and no obligation. See how we buy houses in Culver City and across Los Angeles County.
Other Culver City items that come up at sale
The Building Safety page lists two more items under “Requirements for the Sale of a Property.”
Earthquake gas shutoff valve. A Building Safety information bulletin on CCMC 15.02.130 says that, effective January 9, 2020, a shutoff device must be installed whenever a residential or commercial building or condominium has entered into an agreement for sale. The bulletin says a plumbing permit is required for the installation. If your house does not have one, budget for it or raise it with your buyer early.
Smoke and carbon monoxide alarms. The Fire Department publishes a handout on alarm requirements for resale, based on state codes.
If the property is a rental, registration with the City is a separate obligation. See our guide to the Culver City rental registration deadline for sellers.
Culver City property report FAQ
Does Culver City require a report before selling a house?
Yes. Culver City Municipal Code section 15.08.015 requires the owner or an authorized representative to obtain a property report from the City before entering into an agreement of sale. The City’s form is the Application for Report of Building Records.
How much is the Culver City Report of Building Records?
The City’s online application lists $479.50 for residential property with less than 4 units and $640.25 for commercial property (checked 2026-11-17). Fees are set by City Council resolution and can change.
How long does the report take?
The municipal code says the report is prepared and delivered to the applicant within five working days of the request. If the City has no record of a sewer connection, the report is not issued until a licensed plumber provides proof of a sewer connection or septic system.
Does the City inspect my house for the report?
Chapter 15.08 describes a report of City records: zoning, authorized use and occupancy, permits and restrictions of record. It does not describe an inspection of the house. Call Building Safety at (310) 253-5800 to confirm how your report will be prepared.
Who orders the report, the seller or the buyer?
The code puts the duty on the owner or the owner’s authorized representative, which can be an agent or escrow. The seller delivers the report to the buyer, and the buyer signs a receipt that goes back to the Building Department.
Is a sale void if the seller never got the report?
Not for that reason alone. Section 15.08.040 says no sale or exchange is invalid solely because of a failure to comply with the chapter, unless the failure would be a ground for rescission anyway. A violation is still subject to punishment under the municipal code.
Do I need the report for a cash or as-is sale?
Yes. Chapter 15.08 has no exception for cash or as-is sales. The only exception is the first sale of a property in a subdivision whose final map was recorded not more than two years earlier.
Sources
- Culver City Municipal Code, Chapter 15.08: Property Reports (sections 15.08.005 to 15.08.040)
- City of Culver City: Building Safety Division, Requirements for the Sale of a Property
- City of Culver City: Application for Report of Building Records (online form)
- City of Culver City: Fiscal Year 2026-27 Comprehensive Fee Schedule (PDF)
- City of Culver City: Real Property Transfer Tax
- Culver City Building Safety: Information Bulletin, Earthquake Gas Shutoff Valves (PDF)
- Culver City Fire Department: Smoke and Carbon Monoxide Alarm Requirements for Resale (PDF)
This guide is general information, not legal advice. Rules and fees change; confirm with the Culver City Building Safety Division at (310) 253-5800 before you rely on them.
From the Blog
Latest guides for California home sellers
-

Santa Cruz County’s Online Tax Sale and the Deadline to Claim Excess Proceeds
Santa Cruz County auctions tax-defaulted homes entirely online after five years of unpaid taxes. Leftover sale proceeds can be claimed, but only…
Read the guide → -

Shasta County’s Tax-Defaulted Property Auction and the One-Year Clock on Excess Proceeds
A Shasta County home can be auctioned off after five years of unpaid property taxes, and any leftover sale proceeds can be…
Read the guide → -

California’s Mills Act: How the Historic-Property Tax Contract Actually Works
The Mills Act can cut a historic home's assessed value sharply below Prop 13 levels, but it comes with a recorded, decade-long…
Read the guide → -

San Mateo County’s Supplemental Tax Bill: How the Number Gets Built
A San Mateo County home sale, inheritance, or finished addition triggers a second tax bill calculated nothing like the one you already…
Read the guide → -

San Pablo’s 2026 Just-Cause Ordinance: What Changed for Landlords on April 1
San Pablo adopted new tenant protections effective April 1, 2026 that reach further than state law. Here is what changed for owners…
Read the guide → -

California Civil Code 1101.4: The Water-Conserving Plumbing Fixture Law Before You Sell
California Civil Code 1101.4 requires every pre-1994 single-family home to have water-conserving plumbing fixtures, with a statewide deadline that passed on January…
Read the guide → -

California’s AB 38 Home-Hardening Disclosure: What Sellers Must Give Buyers
AB 38 requires California sellers in a high or very high fire hazard severity zone to disclose specific wildfire vulnerabilities and low-cost…
Read the guide → -

Marin County’s Tax-Defaulted Property Auction and the Deadline to Claim Excess Proceeds
Marin County sells tax-defaulted homes through an online auction, and any surplus above what was owed can be claimed by parties of…
Read the guide → -

Piedmont’s Measure GG: What the Higher Transfer Tax Means for Sellers
Piedmont voters approved Measure GG, raising the city's transfer tax from 1.3% to 1.75% starting July 1, 2027. Here's what that means…
Read the guide →
